150+ projects since 2017

[ The Product Package ]

Your product, designed.
A$6,990, three weeks.

Paid in two: A$2,790 at kickoffto start, A$4,200 when you approve your concept.

Start my product Book a 20-minute call with a co-founder
  • Every file and the IP are yours
  • One fixed price, never hourly
  • We never take a share of your idea

[ What you get ]

The package in full,
every step shown on Mango.

Your product gets exactly these steps, and every file is yours at the end.

One product followed from the brief to the report: Mango, our own speaker. It went further, with a brand and a site we made for it; your product gets exactly the steps below, and every file comes with your report.

Week 1The hard questions, answered with numbers.16 kHz Four layouts calculated: only three coaxial modules keep the sound the same all round.Four layouts calculated: only three coaxial modules keep the sound even.
Week 1Every part inside, sized and placed to scale.610 g in 1,074 cm³ sealed: Mango floats almost half above water.

End of week 1, you chooseTwo concepts, same inside

Two concepts for Mango around the same inside: Pebble, and Mango, the one chosen

Pebble

Chosen

End of week 1, you chooseTwo concepts. You pick one, we take it all the way.2 directions around the same inside: Pebble, and Mango, the one chosen.
Weeks 2 and 3Your STEP CAD files, every part modeled.The file a workshop builds from. The shell file to 3D print comes with it.The file a workshop builds from.

Weeks 2 and 3Exploded view . Version 14

Mango taken apart, every part of our STEP CAD in its place
Weeks 2 and 3The exploded view, every part apart.Opened up from the same CAD: what goes where, before a single part is made.What goes where, before a part is made.
Weeks 2 and 3Five images in a real setting.Plus an exploded view and a cutaway, rendered from the CAD before the product exists.Rendered from the CAD, before the product exists.

Also in the package

  • Your product brief what it must do, for whom, at what price; signed off before anything is drawnwhat it must do, for whom, at what price
  • Colors and materials one colorway, two variants, every finish named
  • Your report, presented on a 60-minute call at the end of week 3; then every file and the IP are yoursevery file and the IP are yours

Everything above, on your product, in three weeks.

Start my product

After the three weeks, you decide

A prototype, crowdfunding, production, or your own way with the files. Each quoted only if you ask.

What comes next, step by step

None of these is in the A$6,990. Each step is quoted on its own, only if you ask, once your package is handed over.None of these is in the A$6,990. Each is quoted only if you ask.

The Product PackageThree weeks

  1. Week 1understand and decideA$2,790

    • Product briefWhat it must do, for whom, at what price. Signed off before anything is drawn.What it must do, for whom, at what price.PDF
    • The hard questionsUp to three, answered with numbers.
    • A first architectureEvery part inside chosen, sized and placed to scale.Every part inside, placed to scale.3D
    • Two pre-concepts, renderedAround the same inside. Then you choose: continue, or stop here.Then you choose: go on, or stop here.2 PNG

  2. Weeks 2 and 3design itA$4,200

    • STEP CADThe chosen concept's detailed architecture, every part modeled.Your concept, every part modeled.STEP
    • The shell, ready to 3D printAt real size, to hold it in your hand.STL
    • Colors and materialsOne colorway and two variants, every finish named.One colorway, two variants.
    • Five images in a real settingPlus an exploded view and a cutaway.5 PNG

  3. End of week 3the handover

    • Your Product PackageEvery file above and the report, handed over on a 60-minute call.Every file, handed over on a call.ALL FILES

A file you keep. Every file and all the IP are yours at the end.A file you keep. Every file and the IP are yours.

Not included: a working prototype, electronics development, design for manufacturing, factory quotes, brand and website.prototype, electronics, manufacturing, brand.

[ One fixed price ]

A$6,990

Not the right concept? Stop after week 1, keep the report, owe nothing more.

Week 1understand and decideA$2,790

  • Your brief
  • Hard questions
  • Architecture
  • 2 concepts

Weeks 2 and 3design itA$4,200

  • 3D CAD
  • Shell to print
  • Colors
  • 5 images

Every file and the IP are yours

Today, at kickoffA$2,790

A$4,200 when you approve your concept.

  • Secure card payment
  • NDA on day one
  • Stop after week 1, owe nothing more

Your order is saved as you type, so you can finish it later. Privacy

In Australian dollars, by card, on Stripe's secure form, right here. The terms of sale come first. The A$4,200 is never taken automatically: you release it yourself.

  • Every file and the IP are yours
  • One fixed price, never hourly
  • We never take a share of your idea
Want to talk first? Book 20 minutes with a co-founder

[ Who does the work ]

A product design studio
in London, since 2017.

Headphones, an air purifier, a lawn mower, saunas, an aircraft: 150+ projects, for people who sell what they make and for companies that already do. Your calls are with one of our two co-founders: Clément, or Izek for anything that flies.

150+ products since 2017, for founders in Australia too. You talk to a co-founder: Clément, or Izek for anything that flies, on a video call in your time zone.

“With ONMOTIO we found the perfect design partner for our project KORU. The result speaks for itself.”

Friedrich Eickhoff, CEO, Botany Labs

CES Innovation Awards Honoree, 2020 and 2021, for client products.

KORU
Home appliance, crowdfunded

KORU

1000%of its funding goal, US$110k raised

Orphey
Neurotechnology

Orphey

A luxury EEG headphone: seven electrode arrays in a machined housing.

Photonix
Outdoor, consumer

Photonix

100%solar, no fuel: a field ready prototype

Glow Saunas
Outdoor structure

Glow Saunas

An architectural vision turned into a product system.

[ After the three weeks ]

Your design is done.
Where it goes is your call.

The package ends with every file handed over, and the IP yours. Four steps usually follow. Take any of them with us, take the files elsewhere, or stop there. Each one is quoted on its own, only when you ask.Every file and the IP are yours. Four steps usually follow, with us or elsewhere, each quoted only when you ask.

  1. End of week 3

    Your Product Package

    The STEP CAD, the shell to print, the images and the report, every file handed over. The IP is yours, so any team can carry on from them.Every file handed over. The IP is yours.

  2. Next

    A working prototype

    Everything inside made to work: the electronics, the parts that move, the fit of every piece. Built and tested with us, or by a workshop you choose.Electronics, moving parts, fit: built and tested, with us or a workshop.

  3. Then

    Your way to market

    • CrowdfundingA campaign is built on a prototype and images. KORU raised ten times its goal.Built on a prototype and images. KORU raised ten times its goal.
    • InvestorsA product they can hold, and what it costs to make.
    • Your own brandBrand, packaging and a website, when you sell it yourself.Brand, packaging, website.

  4. When you sell

    Production

    Design for manufacturing: wall thickness, draft angles, tolerances, tooling. Then factory quotes and the first run.Wall thickness, draft angles, tooling. Then factory quotes.

Not sure what comes after for your product? Ask us in a 20-minute call

[ Every deliverable ]

The Product PackageThree weeks

  1. Week 1understand and decideA$2,790

    • Product briefWhat it must do, for whom, at what price. Signed off before anything is drawn.What it must do, for whom, at what price.PDF
    • The hard questionsUp to three, answered with numbers.
    • A first architectureEvery part inside chosen, sized and placed to scale.Every part inside, placed to scale.3D
    • Two pre-concepts, renderedAround the same inside. Then you choose: continue, or stop here.Then you choose: go on, or stop here.2 PNG

  2. Weeks 2 and 3design itA$4,200

    • STEP CADThe chosen concept's detailed architecture, every part modeled.Your concept, every part modeled.STEP
    • The shell, ready to 3D printAt real size, to hold it in your hand.STL
    • Colors and materialsOne colorway and two variants, every finish named.One colorway, two variants.
    • Five images in a real settingPlus an exploded view and a cutaway.5 PNG

  3. End of week 3the handover

    • Your Product PackageEvery file above and the report, handed over on a 60-minute call.Every file, handed over on a call.ALL FILES

A file you keep. Every file and all the IP are yours at the end.A file you keep. Every file and the IP are yours.

Not included: a working prototype, electronics development, design for manufacturing, factory quotes, brand and website.prototype, electronics, manufacturing, brand.

[ Before you pay ]

Straight answers
before you pay.

Is A$6,990 the whole price?

Yes. A$6,990, fixed before we start.

  • A$2,790 at kickoff
  • A$4,200 when you approve your concept
  • No VAT: we are not registered for it
  • Nothing added without your yes

Development or prototyping later? Quoted first, only if you ask.

Who are you, and who will I talk to?

ONMOTIO, a product design studio in London.

  • 150+ projects since 2017
  • Registered in England and Wales
  • Your calls: one of our two co-founders, Clément, or Izek for anything that flies
What if I stop after week 1?

You pay nothing more, and you keep:

  • Your brief and the answers to the hard questions
  • The first architecture, as a simple 3D
  • One image of each pre-concept
  • No CAD files, no final images: those come with weeks 2 and 3
What kind of product fits?

Consumer products at the scale of a home.

  • A speaker, a small kitchen appliance, an air purifier
  • A wearable, a tool, an accessory
  • Vehicles, furniture, industrial machines
  • Medical devices, aircraft

Not sure? Book the 20-minute call first.

Do I get a physical model?

You get the file to print it, at real size.

  • The shell, for a print service or your own printer
  • To check how it sits in the hand and how big it feels
  • Nothing inside works
  • Nothing is shipped at this price

A working prototype is the next stage, quoted when you want it.

My product has electronics. Does that work?

Yes. The outside is designed around a real inside.

  • Board, battery, motor, sensors, ports: every part sized and placed
  • Developing the board, the firmware or an app: a separate project, quoted on its own
What if I don't like the concepts?

You revise them, or you stop there.

  • End of week 1: two different concepts, same inside
  • You pick one within 48 hours
  • One round of revisions per delivery, asked within five working days
  • Still not right? Stop after week 1 and owe nothing more

A new direction or a bigger scope is quoted before any work.

Who owns the files and the IP, and when?

You do, once the package is paid in full.

  • The STEP CAD and the shell file
  • The images at full size and the report
  • All the IP in the work made for your product
What does three weeks mean, and how much of my time?

About 3 weeks of working days. We need you 3 times:

  • The kickoff call
  • Your sign-off on the brief
  • Your pick of a concept, end of week 1

Holidays and studio closures don't count. If a sign-off waits, the work after it waits too. The final presentation is offered, not required.

Can a factory make it from these files?

Not yet. This is an advanced concept design.

  • The architecture and the form
  • Production CAD
  • Next: development and prototyping, which always change the design
  • Then design for manufacturing: walls, draft, tolerances, tooling

With us, quoted first, or with the team you choose.

What happens after the three weeks?

You decide. Every file and the IP are yours.

  • Take them to any workshop or factory
  • Or go on with us: a working prototype first
  • Then what your plan needs: crowdfunding, a pitch to investors, production

Each step quoted before it starts, only if you ask.

Can you license or sell my product for me?

No. The product stays yours to sell.

  • We are paid once, for the design work
  • We don't buy, license or take a share of ideas
  • We don't look for buyers
Do you sign an NDA?

Yes, if you want one.

  • Ours, already signed on our side, before you send files
  • Or yours, once we have read it
Clément, one of our two co-founders, at the studio with Mango

[ Rather talk first? ]

20 minutes with a co-founder
to check it fits your product.

Clément, or Izek for anything that flies. Show us what you have (sketches, test pieces, a competitor you cut open) and we tell you straight whether the package fits. Two taps first, so the call is about your product.Show us what you have, and we tell you straight whether the package fits.

1 of 2Who will sell this product?

A$6,990 . three weeksPaid in two: A$2,790 at kickoff, A$4,200 when you approve your concept.
Start my product